www.businessgiftdepot.com

Manufactures instruments for industrial measurement, control and data acquisition applications.
Weight of just 1.5kg..Metrix Electronics Limited supplies and supports an extensive selection of electrical and electronics instruments for laboratory and industrial applications. We operate a Quality Management System which complies with the requirements of BS EN ISO 9001 2008. As members of the GAMBICA trade association we are able to offer applications, advice and specialist assistance on all of the products that we supply. The company is a participant in two GAMBICA special interest groups

Designers and manufacturers of instrumentation slip ring assemblies, load transducers, signal conditioning equipment, wireless telemetry systems, fiber-optic systems, and data acquisition electronics
Michigan Scientific Corporation has developed a broad base of technology to aid our customers. We will help find solutions to our customers& , problems through engineering consultation. If necessary, we will configure commercially available equipment or design and manufacture the needed equipment. This approach has required us to invest in a wide range of capabilities. Several of our engineering capabilities are listed below..

Manufacturers of temperature and pressure instruments for industrial, commercial and food service applications.
Date..Limited License This site is provided by Miljoco Corporation and may be used for informational purposes only. If user does not agree to abide by these terms and conditions, then user should not access this site or download materials from this site. User agrees not to interrupt or attempt to interrupt the operation of the site in any way. Miljoco Corporation authorizes user to view and download the materials at this site only for personal, non-commercial use. Miljoco Corporation shall have

Manufactures signal converters, isolators, digital indicators, arresters.

Manufacture of non-destructive thin film measurement systems.

Supplies interface instruments for process control and measurement, including signal conditioners, smart temperature transmitters, limit alarms, distributed I/O, pneumatic transmitters, AC power trans
Nearest you. Go to.All rights reserved. Specifications and information subject to change without notice. (Terms and Conditions PDF, 10K) All product names used in this Web site are registered trademarks of their respective companies..E-HELP EXPRESS Get product and application answers, technical information and quotes fast. Our application experts do the work for you!.All rights reserved. Specifications and information subject to change without notice. (Terms and Conditions PDF, 10K) All product

Provide sensors and transmitters for temperature, pressure, and level. From Korea.

Manufactures position sensors, temperature and level plus tank gauging systems.
Trademarks of MTS Systems Corporation. All rights reserved in all media.2006 - 2008 MTS Systems Corporation, Sensors Division MTS, Temposonics and Level Plus are registered trademarks of MTS Systems Corporation. All rights reserved in all media.2006 - 2008 MTS Systems Corporation, Sensors Division MTS, Temposonics and Level Plus are registered trademarks of MTS Systems Corporation. All rights reserved in all media.

Provides thin film measurement equipment, application and knowledge support, ultra-compact and rugged thin film quality monitoring instruments designed for integrated metrology.
Our application team provides excellent customer support. We carry out measurements on your wafers, and provide in-depth analysis of your metrology problem in our own class 100 10 1 demo cleanroom. Our very compact tools even allow us to provide on-site demos in your facility. Please mail to application@nanophotonics.de.Die NanoPhotonics GmbH stellt Anlagen fr die Defektinspektion auf Wafern in der Halbleiterindustrie her. Wir agieren global und setzen mit unseren innovativen technologischen

Manufacturer of timing and sensing controls, temperature monitors, and time delay relays for a variety of applications.
AMETEK NCC Dust Collector Controls offer sequential control of solenoid valves for pulse or shaker-damper cleaning of dust collectors. They are also used for display lighting, intermittent valve or sequential control. AMETEK NCC offers impressive factory backup support. Our parts inventory and product availability is unsurpassed. With over 250 stocking distributor outlets, serious downtime problems can virtually be eliminated..Pressure Differential Meter is designed to Interface with NCC dust

Manufacturer of high voltage resistors, power and precision resistors, high voltage dividers, hybrid circuits, resistor networks, pressure and force sensors and load cells.

Manufacturer of portable instrumentation, wireless products, and miniaturized electronics used to instrument industrial applications.
Sens Q is committed to delivering the highest level of support to its customers in order for them to be successful in generating high quality data. This support extends to areas such as frequent publication updates, providing information on surface plasmon resonance technology, and offering various tools to help researchers better understand the affinity and kinetic data being produced..Research and teaching laboratories with a desire to utilize surface plasmon resonance for the study of

Manufactures position sensors, transducers and instrumentation for linear and rotary position measurement and control. Applications include automobiles, medical equipment and plastics manufacturing.
Operates within an accuracy of microns, youll find Novotechnik at work. Novotechnik position sensors enable bullet trains to smoothly round curves at high speed, and fly- and drive- by-wire for jets and cars respectively. They are used to maintain constant speed in packaging machines and for precise positioning of injection pins and dosing cylinders in injection molding machines. Youll find them in mobile and medical equipment, in machine tools, in laboratories in any application where accuracy,

Manufacture and worldwide sales of non-contact level measurement, density measurement, weight measurement process control equipment.
TheVEGAVIB line of level switches for solids has historically contained both rod and fork versions to suit a wider variety of application needs. Starting in October, the VEGAVIB name will remain on the rod version and the name VEGAWAVE will denote the fork version of level switches. This designation willclarify the benefits of the two versions and help makechoosing the right level switcheasier..Ohmart VEGA is pleased to announce J.A. Diaz as the exclusive Factory Certified Supplier of Field

Designs and manufactures precision control orifices, switches and sensors for temperature, flow and pressure applications.
This catalog contains information on an economy line of check valves and checked orifices which can be installed in female threads in sizes 6 32, 10 32, 1 4l20 and 5 16l18. Comparable metric sizes are M3.5, M5, M6 and M8. Valves are available in all metal construction, brass or stainless steel or also with resilient seating - Buna N or Viton..

Manufacturers of process and energy control instruments such as, pressure calibrators, flow computers, totalizers, process controllers, energy computers, transmitters, and custom controls.

Process controllers, bar-graph instruments, digital panel meters, wireless and RF controls.
Founded originally in 1974 and privately held, OTEK Corporation is a true reflection of creativity and entrepreneurship. Our mission is to provide the very best in process measurement and control instrumentation, coupled with unparalleled service to our customers..We design, develop and manufacture all of our products. We work very closely with our clientele to ascertain their needs to give them an end product that not only fulfills its assigned task but exceeds all requirements. We deploy

Manufacturers of industrial oxygen safety monitors and process controllers, OEM oxygen sensors, transfill oxygen monitors, and oxygen analyzer equipment for medical and cardiopulmonary professionals.
Recommended that all ground pins (2, 4, and 5) be used for power supply grounding. Q) What about connecting to the analog outputs for the X2004?A) Note that the analog output voltage is referenced to the system ground at the interface connector. High ground currents in the interface wiring due to the cell heater and thermoelectric cooler will cause an error in the analog voltage if it is not measured relative to the analog ground (interface pin 9). A differential amplifier connected to the

Manufactures and supplies components for precise and reliable measurement of pressure, level and vacuum on processes involving corrosive, viscous, clogging fluids.
Last Updated 10 15 2011 Site Map 2004 2011. Process Measurement Controls, Inc..Last Updated 10 15 2011 Site Map 2004 2011. Process Measurement Controls, Inc..Last Updated 10 15 2011 Site Map 2004 2011. Process Measurement Controls, Inc..Last Updated 10 15 2011 Site Map 2004 2011. Process Measurement Controls, Inc..Last Updated 10 15 2011 Site Map 2004 2011. Process Measurement Controls, Inc..Last Updated 10 15 2011 Site Map 2004 2011. Process Measurement Controls, Inc..Last Updated 10 15 2011

Manufacturer of seismographs, water indicator level reels, and other geophysics related instruments and software. In Italian and English.

Manufactures instrumention and process controllers in India.
The domain pbj-ieec is for sale. To purchase, call BuyDomains at +1 339-222-5147 or 866-836-6791..The domain pbj-ieec is for sale. To purchase, call BuyDomains at +1 339-222-5147 or 866-836-6791..The domain pbj-ieec is for sale. To purchase, call BuyDomains at +1 339-222-5147 or 866-836-6791..pbj-ieec is partnered with SmartName to bring you targeted search terms designed specifically to enhance the users overall online search experience. pbj-ieec displays the top advertisers for and more. We ve

Manufacturers a wide range of analogue and digital signal conditioning modules for industrial automation. San Diego, California, USA.

Manufactures miniature pressure transducers, extensometers, and miniature load cells.
Threaded portion is a sensitive diaphragm face using a 350 Ohm full bridge as a strain sensing element. Due to large output from the full bridge and its good temperature compensation, this model is best suited for applications where a range of temperatures may be encountered, or small increments of pressure must be measured. Model 210 is well-suited to low pressure measurements, and full pressure calibration is furnished. For service at variable temperatures, model 210T should be specified since

A manufacturer of flow, pressure and level measurement solutions for the process and bulk goods industries.
Cameron& ,s Measurement Systems division is a world leader in five key product and or capability sectors including DPU products, turbine meters and totalizers, and sampling and blending. the division is also raising the bar for ultrasonic flow metering and electronic flow measurement. Our flagship product brands include BARTON, NUFLO, CLIF MOCK, CALDON , JISKOOT, LINCO and PROCESS ANALYTICS and the strategy going forward is to strengthen our manufactured product lines and technical capabilities

Manufacturer of precision instruments and controls including barometers, density monitors and level control for use in applications in chemical, petrochemical, food, medical, pharmaceutical, water and
800-221-9237Fax 215 355-7766.

Manufactures and supplies repair parts for Hagan Westinghouse product line including power positioners through to ring balance meters.

Manufacture hygienic diaphragm gauges and a range of temperature and pressure instrumentation for the processed food, pharmaceutical and chemical industries.
9YF, UK. Tel +44 (0) 1704 509090 Fax +44 (0) 1704 509091 Email sales@pci-instruments Multimap PCI Ltd.The Deltapilot is designed for continuous hydrostatic level measurement of chemicals and pastes in the chemical, food and pharmaceutical industries. The pressure sensors with CONTITE measuring cell are watertight, condensation-free and stable with excellent linearity..The Cerabar transmitter accurately measures the pressure of gases, vapours and liquids and can be used in all areas of chemical

Manufacturers and suppliers of level pressure and density transmitters, measurement, monitoring and control equipment.
Discuss your requirements..The Ultrasonic 8000 Series may be fully commissioned as a stand-alone device, the integral display and keypad provide access to all scaling parameters. Enhancing this functionality, the 8000 Series is equipped with an RS485 communications port. A Windows based configuration utility (available free of charge from PSM) runs on a PC connected via this port and provides powerful yet easy to use diagnostic and set up facilities to ensure transmitter is set to work simply

Provides digital and analog circuit design, printed circuit board layout and system design for instrumentation and control electronics.
Microprocessor, microcontroller board system design and prototype construction. Embedded controllers. DSP..Motorola 68HC11 HC12 HC16, 56K, 680x0. Analog Devices SHARC DSP. Rabbit 2000..Microprocessor, microcontroller board system design and prototype construction. Embedded controllers. DSP..Motorola 68HC11 HC12 HC16, 56K, 680x0. Analog Devices SHARC DSP. Rabbit 2000..

Manufacturer of instrumentation including sensors and isolated two-wire transmitters for pH, ORP, dissolved oxygen and conductivity.
Description HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL cms Default.aspx.Description HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled

Specialize in manufacturing manual inclinometers, electronic inclinometers, accelerometers, and tilt indicators .
Bank indicator provides an economic method of determining the lateral differential movement when banking or turning in an aircraft. The bank or slip indicator consists of a curved glass tube filled with a damping liquid in which a small ball rolls. When the craft is horizontal, the ball is located in the lowest part of the tube, as the craft banks, gravity holds the ball at the lowest point as the tube rotates from side to side. The tube can be calibrated to show the angle of banking..One of the

Manufacturers retrofit meter pulse kits for automatic meter reading systems, energy management, scada, data logging and recording systems.
Meter sensors adapt to most electric, gas, and rotary gas meters. These sensors connect directly to the following products without modifications. They provide a Form A output compatible with Form A and C inputs. The following links are neither inclusive nor warranted..

A manufacturer of multi loop and single loop temperature controllers, process controllers, indicators, control systems and level meters as well as temperature sensors, humidity sensors, level sensors
RKC is a worldwide manufacturer of multi loop and single loop PID temperature controllers, process controllers, indicators, control systems and level meters as well as temperature sensors, humidity sensors, level sensors, pressure transducers and recorders. RKC supplies products to a wide range of markets such as semiconductor, plastics, extrusion molding, injection molding, scientific, food industries and heat treat industry or thermal process. Our process and.

Supply of transducers measuring electric current from less than an amp to several million amps. Describes the theory and applications of these devices.
Transient response.Flexible coils are generally more convenient to use than rigid coils but are less accurate. (1% compared with 0.1% for a rigid coil). They are better than rigid coils for high-frequency measurements. The coils are wound on a flexible former. Two sizes are commonly used Standard coils use a 7mm diameter former, thin coils are wound on a 3.2mm former. The overall cross-section of the coil depends on whether it is screened and the thickness of the insulation..Electrical

Sensors and electronic systems for the sheet metal processing and tire industries.
Subsequent transportation this can result in breakage and costly production losses if these conditions of multiple layers are not detected early in the process. For these applications Roland has developed a special single-sided solar sensor based on the eddy current principle for the detection of these dual layers conditions. In collaboration with the well-known manufacturer of vacuum components, the Schmalz Company, Roland developed a modified sensor that can be directly integrated into the

Designs, manufactures, fabricates, installs and services process control instrumentation, safety systems, control panels and related elements.
You don& ,t have permission to access the requested directory. There is either no index document or the directory is read-protected. If you think this is a server error, please contact the webmaster..

Manufactures a range of thin film measurement devices that measures thickness, or coat weight, as low as one millionth of a millimetre (0.001 grammes per square metre) in-line.

Batching systems and moisture measurement for concrete plants, weighing systems and load cells.
Your browser sent a request that this server could not understand. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request..Your browser sent a request that this server could not understand. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request..Your browser sent a request that this server could not understand. Additionally, a 404 Not Found error was encountered while trying to use an

Manufacturer of temperature and pressure measurement modules. Product specifications, application sheets and whitepapers, and list of customers.
To simulate multi-directional wind forces. Ground effect boundary layers are also simulated in these tests. Of recent interest is the interaction of the wind from tornados and hurricanes on structures. The purpose of wind engineering is to determine the interaction of wind with buildings, structures, terrain to enhance design, efficiency, and increase reliability. Pressure Measurements Wind Tunnel testing determines wind load distribution on walls, roof systems, wind suction, or pressures at

Provides thin film metrology systems, thin film design software, and material characterization tools to the semiconductor and optical coating industries.

Manufacturers of level, pressure, flow and temperature measuring instruments used for chemical process, petrochemicals, powergeneration and cement industries. From India.
THE QUALITY PROGRAM Since its inception, Scientific Devices has created its own quality standards employing strict specifications at each stage of product development, manufacturing and procurement ensuring that every instrument is precise and reliable. Confirming in its entirely to Quality standard, this quality program is now implemented throughout our operation including R D, production, sales and service support. SERVICE AND CUSTOMER SUPPORT The philosophy of Scientific Devices is its

Manufacture of transducers for all applications.
Automation Product Group, Inc. 1025 West 1700 North Logan, UT 84321 PH 888-525-7300 or email sales@apgsensors.Automation Product Group, Inc. 1025 West 1700 North Logan, UT 84321 PH 888-525-7300 or email sales@apgsensors.Automation Product Group, Inc. 1025 West 1700 North Logan, UT 84321 PH 888-525-7300 or email sales@apgsensors.Automation Product Group, Inc. 1025 West 1700 North Logan, UT 84321 PH 888-525-7300 or email sales@apgsensors.Output 4-20 mA + (2) solid state relays Supply Voltage 12-24

Manufacturer of shock, tilt, gas and humidity sensors from Taiwan.
Sensor, humidity sensor, alcohol sensor, Alcohol tester module, temperature sensor, air pressure sensor, humidity module, ultrasonic transducer, gas sensor, Atmospheric pressure sensor, and Password shock detector. OEM and ODM are welcome. Please send us your inquiry today..Distance measurement, alarm, remote control, article detecting. etc..Sencera Company Ltd. Taipei, Taiwan ROC Tel +886-2-27041139 Fax +886-943882640 justinel@ms14.hinet.We are a leading Relative humidity sensor and Resistive

Manufacturer smart sensor solutions for mass flow, differential pressure and humidity. From Switzerland.
Differential pressure sensors from Sensirion measure reliably, fast and stable! The digital and analog sensors offer highest accuracy and resolution, especially at very low differential pressures. The small and cost-effective design makes them an ideal match for price-sensitive solutions, e.g. in medical and HVAC applications. Each differential pressure sensor is indi- vidually calibrated and temperature compensated. The outstanding performance is a result of the CMOSensbased, dynamicmeasuring

Manufacturer of pH, ORP, conductivity and dissolved oxygen sensors and electrodes for portable, laboratory, and industrial process applications.
Industrial Dissolved Oxygen Probes provide long life and low maintenance, making themreliable for long term deployment for your waste water or aquaculture applications. more.A wide variety of accessories, including transmitters, mounting hardware, fittings, replacement membranes, caps, and internal fill solutions are available to enhance the service life of your dissolved oxygen probe. more.The ORPMA is a two-wire, 4-20 mA blind transmitter which provides a low cost solution for converting the

Manufacturer of sensors and transducers for temperature, position, speed, pressure, flow and electric current measurement.
Mail Postanschrifft Sensorpro Ltd.48 50a Kilgraston Road,BRIDGE of WEIR, PA11-3DPGreat Britain.Tel. +(44) 1505 615621Fax. +(44) 1505 615633Email info@sensorpro.

Manufactures signal conditioners, isolators, PLC I/O, and power supplies in terminal block packages. Product photos and specifications.

Manufacturers of measuring and analytical instruments as well as test stand equipment.

Manufacturer of pressure sensors, submersible level transducers and pressure transducers and transmitters. In English, German, and French.

Manufacturers of instruments for electrolysis industry, ammeter clamps and portable instruments. From France.
Is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested Url eng activities.htm page-catalogue-listeproduits.aspx.

Manufacturer of sensors and instrumentation including pressure sensor, temperature sensor and flow sensor.

Manufactures precision accelerometers and inclinometers for applications ranging from military, civil aviation, road, bridge and tunnel building, robotics and satellite communications.

Manufacturers humidity sensors and dust sensors for scientific measurement, air conditioning, residential and industrial use.

Manufacturer of industrial flowmeters, level meters and automatic control equipment, based in Tokyo, Japan. In English and Japanese.

Manufacture of sensors that sort, count, inspect, measure, size and overall shape of objects, contrast sensors, luminescence sensors recognize fluorescent markings, labels, threads, lubricants and adh

Manufacturers of a wide range of capacitive sensors. Many specialty sensors, including flexible, high temperature and analog capacitive sensors.
Confined spaces.Balluff SIE level detection sensors, complete with reliable smartLEVEL technology, offer easy-to-use level application performance. SmartLEVEL sensors compensate automatically for foaming, filming, and material build-ups to prevent false triggering. Setup and maintenance are simple since, in most cases, these sensors do not require a preadjustment or teach-in..Balluff acquired SIE Sensorik a worldwide leader in capacitive sensors - in 2007. Balluff SIE offers a wide variety of

Manufacturers process photometers for continuous monitoring of safety, purity, quality optimization and control of all process steps.
Please contact our webmaster..The URL http www.photometer en en abc show.html?q=Monochromaticity?v=xml could not be found. Please update your bookmark. If the problem persist, please contact our webmaster..The URL http www.photometer en en register.html?v=xml could not be found. Please update your bookmark. If the problem persist, please contact our webmaster..The URL http www.photometer en en products summary.html?v=xml could not be found. Please update your bookmark. If the problem persist,

Manufacturer of micro-machined capacitive accelerometers, sensors, systems for acceleration measurement.
Reserved.Silicon Designs, Inc. 1445 NW Mall St. Issaquah, WA 98027.2011. All rights reserved.

Simple process control for the industrial controls market. No need for control engineering expertise.
You don& ,t have permission to access .ftpquota on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request..You don& ,t have permission to access cgi-bin on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request..

Manufacturer of capacitive sensors for automation of level and product presents for agricultural and industrial purposes and climatic sensors are made for atmospheric measurements.

Manufacture pressure/vacuum feedthroughs, design type T thermocouples, and offer thermal validation consulting and custom fabrication services.
Established in 1985 and incorporated as Skyl-Tech, Inc. in 1988, we are dedicated to supplying the pharmaceutical, food, electronics and aerospace industries, and OEM to these industries, with temperature sensors and FEEDTHRU sealing glands for validation and monitoring studies in autoclaves, ovens, freeze dryers, and isolators. Today we are a world leader in specialty thermocouples and FEEDTHRUs with an extensive line of precision products developed to meet our customers specific needs. We

Manufacturer of custom proximity, speed, Hall effect, motion, and temperature sensors and custom cabling.
Inc. 6 Mill Creek Center Brevard, NC 28712 Telephone (828) 884-3490 Fax (828) 877-3100 Email info@smith-systems-inc.Smith Systems, Inc. Sensors and Custom Cabling Contact Us.Smith Systems, Inc. 6 Mill Creek Center Brevard, NC 28712 Telephone (828) 884-3490 Fax (828) 877-3100 Email info@smith-systems-inc.Smith Systems, Inc. Superior Active Speed Sensors Digi-Tran Speed Sensors.Smith Systems, Inc. 6 Mill Creek Center Brevard, NC 28712 Telephone (828) 884-3490 Fax (828) 877-3100 Email

Shock, climate, and turbidity measurement.
Aus der Gesch ftsbeziehung, einschlie lich Nebenforderungen, Schadenersatzanspr chen und Einl sungen von Schecks und Wechseln, Eigentum des Lieferers. Der Lieferer verpflichtet sich, entsprechende Sicherungen dann freizugeben, wenn mindestens 90% der Forderungen beglichen sind..Der Besteller ist verpflichtet, die unter Eigentumsvorbehalt stehende Ware pfleglich zu behandeln, insbesondere ist er verpflichtet, diese auf eigene Kosten gegen Feuer-, Wasser- und Diebstahlsch den ausreichend zum

A supplier of equipment for electronic training for industrial and educational laboratories. Based in Italy.

Manufacturer of liquid level, pressure, and optical sensors, and proximity switches for aviation, medical, transport, commercial, industrial and marine applications.
Have a cooperation with a high technology partner like SST..The CO2 Air Quality Monitor brand familyconsists of4 family members - the AQ-Alert,the AQ-Control, the AQ-Climate Control and the AQ-Transmit.Thesensors havetheir own range of specifications. The Air Quality monitors are ideal fordetermining the level of Carbon Dioxide in new, air tight office and school buildingsin order to keep individuals alert and proactive in their lessons or during their daily activities. Would you like some FREE

Provides manufacturing automation through process controls, specialist weighing systems, bulk handling equipment, human-machine interface, material handling equipment.
Re-built DF Mills (Dual Fed Hammermills,) which were introduced in 1939 and have been one of our most popularly requested products of all time..Providing Reliable Particle Management Solutions For Over 80 Years Prater-Sterling, our motto is Results Come First. Our products work to serve your dry processing, powder and bulk solids applications. With Prater-Sterling& ,s extensive line of equipment and systems, you will obtain the best possible results of your process time after time. Each of our

Manufacture of water level sensors, water quality sensors, soil moisture sensors, water flow measurement, and basic weather monitoring sensors.
The unit installs in minutes and will provide accurate, long term, continuous monitoring in hostile environments. The sensor is designed to operate within a temperature range of -30 to +70 C and withstand wind speeds up to 167 mph..Vaisala HMP155 Relative Humidity Temperature Sensor The Vaisala HMP155 humidity and temperature probes are designed for a wide range of instrumentation e.g. recorders, data loggers, laboratory equipment and weather stations. Operating range is 0% to 100% relative

Designs, manufactures and sells pneumatic-electronic gauges and control devices.
Advanced Machine Engineering Co. 2500 N. Latham St. Rockford, IL 61103.Advanced Machine Engineering Co. 2500 N. Latham St. Rockford, IL 61103.Advanced Machine and Engineering Co. 2500 N. Latham Street Rockford, IL 61103 U.S.A..Stotz Feinmesstechnik GmbH Hermann Dreher Str. 6 D-70839 Gerlingen, Germany Phone +49 (0) 71 56-9 49 04-0 Fax +49 (0) 71 56-9 49 04-9 email info@stotz.Advanced Machine Engineering Co. 2500 N. Latham St. Rockford, IL 61103.

Manufacturer of fluid switches, load cells, force sensors and pressure transducers.
Engineers will recommend a solution to meet your accuracy and cost goals USA askus@smdsensors Europe smd@smdsensors.

Provides solutions in measurement, control, display, instrumentation.

Process control and measuring instrumentation.
Established in 1989, Renake sales Services specializes in manufacturing and trading activity in process control instruments viz. Pressure, Humidity, Temperature and Air Flow. Having acquired authorized distributorship of Rotronic, Switzerland and Honeywell Sensym ICT, USA in 1997, Jupiter Electronics are leaders in process control instruments and marketing Pressure, Temperature, Humidity Air Velocity Sensors and Transmitters. . . . . . . . . . MORE.885 1 4, Bhandarkar Road, Deccan Gymkhana, Pune

Design and manufacture industrial process control and measurement instrumentation and systems. Products include amplifiers, batch controllers, portable load meters, data loggers, signal converters, a
Simple to use, quietand unobtrusive. This belies the complexity of the operation controls and safety monitoring systems which were a mammoth task to develop!.The main advantages we have found in using Synectic Design& ,s amplifiers are Low cost amplifier compared to lab based equipment. The compact design allows us to pot the circuit in small boxes creating a robust instrument. These items are used offshore so the mechanical requiremnts are tough. Most lab amps are only designed to be rack

Manufactures leak detectors, load cells, pressure cells, LVDT, displacement transducers and torque transducers.
Kinds of pressure in our daily lives pressure exists in Cars, Air-conditioners and Mobile Phones. It exists in production factories, civil engineering and construction sites, environmental and pollution assessment, medical examinations and space exploration by space shutters. Fukuda controls these invisible pressures and allows a peace of mind and safety. Fukuda supports our daily lives in unsuspecting places, several components of our daily life must be free of leakage or be airtight. Examples

Manufacturer of industrial control instruments, ultrasonic level measurement and pressure measuring instruments.
Development of Canada mining and mineral-processing industry, for the benefit of all Canadians. Heating and Cooling Services in Idaho - Visit our website for up to date Consumer Information, Tips and Articles. Ameri-Serv offers the Best Value on Heating and Air Conditioning Services in the Treasure Valley. Ac repair Dallas - AC Repair Dallas. Air Conditioning Dallas Homes and Businesses for more than a decade. Call The comfort specialist today. Australian Metal RecyclingSouthern Cross Metal

Manufacturer of the wireless telemeter equipment.
2-1,3-Chome, Shibuya, Shibuya-ku, Tokyo 150-0002, JAPAN Tel. 81-3-3400-8834FAX. 81-3-3400-8545.

The smart scanner has applications for on-line measurement of thickness/weight of plastic films, paper tapes, coated tapes.
Na kilka lat, w korzystnej cenie. Jestem studentem piątego roku. Dalej.Pok j, z osobną łazienką, z pięknym widokiem dla grzecznej koleżeńskiej osoby. W mieszkaniu mieszkam ja. Jestem 21 letnim mężczyzną. Dalej.Jestem studentem 1 roku szukającym 3 pokoj w, jak najprędzej. Dalej.Kontaktowy facet poszukuje 2 pokoje do wynajęcia, dość tanio, pilnie. Dalej.Cześć D Poszukujemy trzech pokoi do wynajęcia na długi okres czasu, koło śr dmieścia, CZYM PRĘDZEJ!. Dobrze jabky był

Manufacture of pressure, temperature, and flow rate control products, and electronic control systems.

Manufacturer of infrared gas sensors and CO2 monitors .
The Telaire product line boasts over 30 patents related to the design and application of low-cost infrared gas sensing. Our designs have received numerous awards including the prestigious Photonics Spectra Award for innovative optical technology and have been featured in national publications such as Popular Science. Utilize our experience, research and development prowess, and high-volume manufacturing capability to deliver an affordable sensing solution in a timely manner.Our low-cost infrared

Produces electrical and mechanical instrumentation for pressure, temperature, level and flow.

Manufacturing process and analytical instrumentation including continuous level, point level, density, portable alloy and soils analysis and special application instruments.

Manufactures liquid level and flow sensors.
Qualified sales representative..Thomas Products provides the highest quality liquid level switches the industry has to offer. All of our level switches are manufactured in house and stocked for immediate delivery. Whether you are in the need for a multi-level indicator, side mounted, single level, or a bottom mounted level switch, Thomas has the part for you. Thomas can manufacture simple liquid level float switch as well as continuous output level transmitters and everything in between. Our

Manufacturer of sensors base on eddy current measurements. Application areas include electrical power, metallurgy, chemical industry, petroleum, and aviation.

Maker of tilt transducers, inclinometers, clinometers and other angle transducers and systems.
Canadian Department of Defence E M I Electronics European Space Agency Government of India Hoverspeed Jodrell Bank Radio Telescope UK Ministry of Defense (Navy) National Power Powergen Rolls Royce Italian Navy Danish Navy Royal Aircraft Establishment Farnborough Scottish Power Shell Tankers South of Scotland Electricity Swan Hunter Shipbuilders Thames Water U K A E A Universities including - Cambridge, Cardiff, Edinburgh, Manchester, Southampton, Imperial College etc. EADS Astrium Motherwell

Manufactures sensors for temperature, air humidity, air pressure, precipitation, wind velocity and direction, global radiation, density of light, and UV radiation.

Manufacturer of portable, bench top and online acoustic leak detection systems used to find leaks in pressurized vessels including power boilers, recovery boilers and feedwater heaters.
Effort to improve response time for the high volume of customers needing assistance with data analysis..VAMS Replay software is required to view the data on the remote computer. Once the VAMS Replay software is installed, the plant can view up to the minute data on the remote computer without moving to the system enclosure. The VAMS Replay program can be installed on an unlimited number of computers. VAMS uses UDP protocol and requires an outgoing port..VAMS does not provide a pathway into the

Offers a range of sensing cables, digital central units and accessories that detect leaks.
Wise,. expressed the ME Regional manager Christophe Galmiche, after the whole day presence in the exposition hall. Several concret projects have been covered during the day..TTK Company was founded in France, in 1989. TTK develops, manufatures and sells Digital Liquid Leak Detection Systems, based on a range of Digital Sensing Cables, digital Units and accessories. The technical solutions are based on a range of sensing cables, digital units and accessories. The presence of a liquid on a sensing

Suppliers of industrial instrumentation and process control equipment in the province of british columbia. Suppliers of food processing and packaging machinery in the western canadian provinces of b.

Develops and produces heat flux sensors and transducers. Links to company background, products and services, newsletter and informative articles.

Manufacturer of custom eddy current probes (sensors) for automotive, fastener, aircraft and nuclear power.
Relative position on a test part. If the test part is the same material, temperature and hardness, geometrical differences can be detected. Likewise if the test part is the same material, temperature and geometry, hardness differences can be detected. Because temperature, material, hardness and geometry are never exactly the same even on seemingly identical parts a window is set up to allow for slight variations in the parts. When a part with acceptable impedance reading is detected, the solid

Manufacturer of spelizied intelligent sensors for seam detection and paper separation.

Manufacturer of infrared moisture meters, optical instruments and electronic instrumentation for manufacturing processes.
This is not an auction, all items are sold as first come - first served. Please be patient with the evolving pages..

Designs and manufactures heaters, sensors, controllers, software for process and thermal systems.
Operating range, Class I, div 2 rating, SD card expandable memory, USB connectivity and free configuration software..Watlow& ,s EZ-ZONE RM integrated controller has a range of 1 to 16 modules controlling 1 to 64 loops. View this video to see how the EZ-ZONE RM can be used as a temperature controller, limit controller or hybrid controller..

Industrial sensors include flow meter and switch, proximity sensor and switch, hot metal detector and laser barrier system for remote sensing. Captor Group of companies.
Captor-systems is designed with the following principles R-captor, A-captor, Mo-captor, Me-captor and vent-captor. Each captor system is different, the most important is the R-captor. R is for relative to your needs. Relative is the most commonly used captor. After installation, this unit automatically adjusts the present flow rate at 100%. We have the R-captor with.MONITORING SYSTEMS Availably very soon. In a pumping system that controls the flow speed, for example..

Manufactures RTDs, thermocouples, temperature and pressure transmitters, fiber optic modems, and Beacon tank temp. sensors. Member of the Concentric Group.
Provided, however, that title to any software or other licensed property incorporated within or forming a part of the Products shall at all times remain with Seller or the licensor(s) thereof, as the case may be. Any claims for damage to, or loss of, or mis-delivery of, the Products will be filed directly with the carrier by Buyer..WARRANTY. Weed Instrument Co., Inc. d b a Ultra Electronics, Nuclear Sensors Process Instrumentation (Seller) warrants that the Products will operate substantially in

Manufacturer of analog and digital panel meters, shunts, transducers and a range of digital meters. Based in Germany. Site describes products and lists worldwide representatives.
Bitte verwenden Sie einen Browser, der Frames darstellen kann. Danke..Bitte verwenden Sie einen Browser, der Frames darstellen kann. Danke..

Manufactures temperature and pressure measuring instrumentation for commercial and industrial applications.
Applications where operator safety is a factor. This solid front gauge is equipped with a solid wall separating the indicating dial from the bourdon tube and a blow-out back which will release from the caseif the bourdon tube should rupture. Available with phosphor bronze brass, 316 stainless steel or monel internals,liquid-filled or dry construction, this gauge is ideally suited for the require-ments of the Process, Power and Chemical Industries. This high quality gauge offersthe benefit of

Manufactures interconnect products for electronic and industrial applications with subsidiaries and sales offices in many countries.
Electric products set the standards in pluggable connection technology for building automation and automation technology. This achievement makes us one of the technology leaders and leading innovators worldwide. Wherever energy or signals are distributed, Wieland stands for a green light for innovative ideas. Because Contacts are green..

Manufactures pressure and temperature instrumentation, mechanical and electronic.
Description HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested Url english _SiteSelections.aspx.

Manufacturers of signal conditioning and process control products for the process industries, system integrators, and original equipment manufacturers.
Contact Information Wilkerson Instrument Co.,Inc., Inc..Contact Information Wilkerson Instrument Co.,Inc., Inc..ENCL900 Series PreWired Enclosures The ENCL900 Series are NEMA 4X polycarbonate enclosures prewired to hold a Wilkerson Instrument Co. DR9011 or DR9051R wireless transmitter, or DR9021 wireless receiver and has ample DIN rail space for other devices. A short, small diameter coaxial cable is supplied which connects the wireless unit to the Type N connector mounted in the top of the

Manufacture of pressure and temperature gauges and transmitters. From Canada.
Applications..Instrumentation accessories sometimes require repetitive mentions. They are often the least mentioned during sales calls but provide an important benefit to prolonging the life of products. This month, make a concerted effort with your team to talk about Winters thermowells..worldwide certifications. Winters complete line of transmitters feature all stainless steel construction and ceramic sensors, ensuring a compact yet robust level of performance for all industrial and process

Latest searches: